Flex AWD V6-3.5L (2009)
48. NOTE: The hex-holding feature can be used to prevent turning of the stud while removing the nuts.
NOTE: RH shown, LH similar.
Remove and discard the tie-rod end nuts.
-
Separate the tie-rod ends from the wheel knuckles.
49. Position the Powertrain Lift under the subframe assembly.
50. NOTE: RH shown, LH similar.
Remove the subframe bracket-to-body bolts.
51. NOTE: RH shown, LH similar.
Remove the rear subframe bolts and the subframe brackets.
52. NOTE: RH shown, LH similar.
Remove the front subframe bolts.
