Flex AWD V6-3.5L (2009)
Lifter / Lash Adjuster: Removal and Replacement
Valve Tappets - Removal
Valve Tappets
NOTICE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while
cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, may cause engine failure.
1. Depending on the valve tappets being serviced, remove the LH and/or the RH camshafts. For additional information, refer to Camshaft See:
Camshaft/Service and Repair/Removal and Replacement/Camshaft - Removal.
2. NOTE: If the components are to be reinstalled, they must be installed in the same positions. Mark the components for installation into their
original locations.
Remove the valve tappets from the cylinder head.
Valve Tappets - Installation
Valve Tappets
NOTICE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while
cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, may cause engine failure.
1. NOTE: The valve tappets must be installed in their original positions.
NOTE: Coat the valve tappets with clean engine oil prior to installation.
Install the valve tappets.
2. Depending on the valve tappets being serviced, install the LH and/or the RH camshafts. For additional information, refer to Camshaft See:
Camshaft/Service and Repair/Removal and Replacement/Camshaft - Installation.