Flex AWD V6-3.5L (2009)
28. Install the accessory drive belt tensioner and the 3 bolts.
-
Tighten to 11 Nm (97 lb-in).
29. Install the power steering pump and the 3 bolts.
-
Tighten to 25 Nm (18 lb-ft).
30. Install the Power Steering Pressure (PSP) tube bracket bolt.
-
Tighten to 10 Nm (89 lb-in).
31. Install the PSP bracket and nut to the RH valve cover stud bolt.
-
Tighten to 7 Nm (62 lb-in).
32. Attach all of the wiring harness retainers to the LH valve cover and stud bolts.
33. Connect the 3 LH coil-on-plug electrical connectors.