Flex AWD V6-3.5L (2009)
NOTE: Use a camshaft sprocket bolt to turn the camshafts.
Rotate the LH camshafts to the TDC position and install the Camshaft Holding Tool on the flats of the camshafts.
Assemble the LH VCT assembly, the LH exhaust camshaft sprocket and the LH secondary timing chain.
-
Align the colored links with the timing marks.
Rotate the crankshaft clockwise 60 degrees to the TDC position (crankshaft dowel pin at 11 o'clock).
Install the crankshaft timing chain sprocket.
Install the primary timing chain with the colored links aligned with the timing marks on the VCT assemblies and the crankshaft sprocket.
As a post-check, verify correct alignment of all timing marks.