Flex AWD V6-3.5L (2009)
Air Door Actuator / Motor: Service and Repair
Mode Door Actuator - Defrost/Panel/Floor Door
Mode Door Actuator - Defrost/Panel/Floor Door
Removal and Installation
1. Remove the instrument cluster.
2. Remove the speed control deactivator switch.
3. NOTE: The upper rear mode door actuator screw can be accessed through the instrument cluster opening using a swivel-type socket and
extension.
Remove the 3 defrost/panel/floor mode door actuator screws.
4. Disconnect the defrost/panel/floor mode door actuator electrical connector.
5. Remove the defrost/panel/floor mode door actuator.
6. To install, reverse the removal procedure.
Mode Door Actuator - Air Inlet Door
Mode Door Actuator - Air Inlet Door