ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Driver Air Bag Module|Page 5771 > < Driver Air Bag Module|Page 5769
Page 5
background image

14. Seats with manual track, disconnect the electrical connector and separate pin-type retainers from under the seat.

1. Separate the side air bag module electrical connector and wire harness retainers.

2. Slide the side air bag electrical connector locking clip back.

3. Push the tab in and disconnect the side air bag module electrical connector.

15. Route the wire harness out from under the seat.

16. Position the backrest trim cover aside and remove the 4 recliner-to-backrest frame bolts (2 shown). Remove the backrest.

17. Invert the backrest trim cover up and remove the first row of hog rings.

18. Invert the backrest trim cover up to expose the side air bag module deployment chute.

Driver Air Bag Module|Page 5771 > < Driver Air Bag Module|Page 5769