Flex AWD V6-3.5L (2009)
2. Seats with manual track, position the 2 side air bag module studs and locator pin through the backrest frame and install the 2 nuts.
-
Tighten to 10 Nm (89 lb-in).
3. Seats with manual track, position the side air bag wire harness and install the pin-type retainer.
4. Roll the backrest trim cover down and position both ends of the deployment chute through the backrest foam pad opening.
5. Position the deployment chute around the side air bag module.
1. Insert the outboard side of the side air bag deployment chute between the backrest foam pad and the side air bag module, pulling it around the
outboard side of the backrest frame.
2. Insert the inboard side of the side air bag deployment chute between the backrest foam pad and the backrest frame, pulling it around the
inboard side of the backrest frame.