Flex AWD V6-3.5L (2009)
4. Pull out to release the clips and separate the cushion side shield.
6. Separate the backrest trim cover lower J-clips and invert the backrest trim cover up to the first row of hog rings.
7. Remove the 3 first row hog rings.
8. Invert the backrest trim cover up and remove the 3 second row hog rings.
9. From the rear of the backrest, separate the backrest trim cover J-clip attached to the backrest frame wire.
10. Squeeze the ends of the deployment chute clips together and open the deployment chute.
11. Invert the backrest trim cover up and pull the deployment chute through the backrest foam pad.
12. Separate the side air bag module wire harness retainers from the backrest frame.
