Flex AWD V6-3.5L (2009)
Seat Position Sensor: Service and Repair
Seat Position Sensor
NOTE: The air bag warning indicator illuminates when the correct Restraints Control Module (RCM) fuse is removed and the ignition is ON.
NOTE: The Supplemental Restraint System (SRS) must be fully operational and free of faults before releasing the vehicle to the customer.
1. Position the driver seat and remove the 4 seat-to-floor bolts.
2. Depower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering See: Air Bag
Systems/Air Bag(s) Arming and Disarming/Service and Repair/Supplemental Restraint System (SRS) Depowering and Repowering.
3. Remove the seat position sensor.
-
Release the lock tab and remove the seat position sensor from the seat bracket slots.
-
Disconnect the electrical connector and remove the seat position sensor.
4. To install, reverse the removal procedure.
5. Repower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering See: Air Bag
Systems/Air Bag(s) Arming and Disarming/Service and Repair/Supplemental Restraint System (SRS) Depowering and Repowering.
