Flex AWD V6-3.5L (2009)
Removal
NOTICE: While repairing the power steering system, care should be taken to prevent the entry of foreign material or failure of the power
steering components may result.
1. Using a suitable suction device, siphon the power steering fluid from the power steering fluid reservoir.
2. Remove the 7 pin-type retainers and the RH splash shield.
3. Position the Stretchy Belt Remover on the power steering pump pulley belt as shown.
4. NOTE: Feed the Stretchy Belt Remover on to the power steering pump pulley approximately 90 degrees.
Turn the crankshaft clockwise and feed the Stretchy Belt Remover evenly on the power steering pump pulley as shown.
5. Remove the power steering pump belt.
-
Fold the Stretchy Belt Remover under the inside of the power steering pump belt as shown.
-
In one quick motion, firmly pull the Stretchy Belt Remover out of the RH fender well, removing the power steering pump belt.
