Flex AWD V6-3.5L (2009)
5. Decompress and remove the spring. Remove the dust boot and jounce bumper.
-
To maintain wheel camber:
-
position the notch and arrow on the upper strut mount outboard opposite the locator tab on the strut.
-
To adjust camber +0.5 degrees:
-
position the notch and arrow on the upper strut mount inboard aligned with the locator tab on the strut.
6. NOTICE: Do not overtighten the strut rod nut. Damage to the nut or strut rod may occur.
NOTE: Make sure the spring is correctly seated in both spring seats.
To assemble, reverse the disassembly procedure.
