Flex AWD V6-3.5L (2009)
6. Install the 2 secondary latches on the transmission fluid cooler tubes at the transmission fluid cooler thermal bypass valve.
7. Compress the constant tension clamps and install the transmission fluid cooler tubes on the transmission fluid cooler.
8. Install the battery tray and bracket, install the battery tray bolt and the nut.
-
Tighten to 9 Nm (80 lb-in).
9. Install the 2 lower battery tray bracket bolts.
-
Tighten to 9 Nm (80 lb-in).
10. Attach the wiring harness retainers to the battery tray.
11. Install the battery.
12. Position the ACL assembly in place and install the 2 ACL assembly bolts.
