Flex FWD V6-3.5L (2010)
Remote Control: Service and Repair
Steering Wheel Controls
Removal and Installation
1. Remove the driver air bag module. For additional information, refer to Restraint Systems.
2. Disconnect the steering wheel controls electrical connector.
3. Remove the steering wheel bezel box.
1. Remove the 4 screws.
2. Release the top 2 tabs.
3. Release the bottom 2 tabs.
4. NOTICE: Lightly hand-tighten the screws. Do not use power tools. Failure to follow this instruction may result in damage to the bezel
box or steering wheel controls switch.
Remove the 4 screws and separate the steering wheel bezel box from the steering wheel controls bezel.