Flex FWD V6-3.5L (2010)
Door Lock Cylinder: Service and Repair
Door Lock Cylinder
Removal and Installation
NOTE: Individual lock cylinders are repaired by discarding the inoperative cylinder and building a new lock cylinder using the appropriate lock repair
package. The lock repair package includes a detailed instruction sheet to build the current key code of the vehicle.
1. Remove the exterior door handle. For additional information, refer to Exterior Door Handle See: Doors, Hood and Trunk/Doors/Front Door/Front
Door Handle/Front Door Exterior Handle/Service and Repair/Exterior Door Handle.
2. Release the tab and remove the door lock cylinder.
3. NOTE: Upon installation, make sure that the d-slot in the lock cylinder lines up with the d-slot in the lock cylinder lever.
To install, reverse the removal procedure.