Flex FWD V6-3.5L (2010)
Head Rest: Service and Repair
Head Restraint - Driver, With DVD
Head Restraint - Driver, With DVD
Removal
1. Remove the front seat. For additional information, refer to Seat - Front See: Service and Repair/Front Seat/Seat - Front.
2. NOTE: The seat track rear height adjust must be all the way up or the recliner cover post will not slide out of the seat track hole.
Remove the recliner cover.
1. Remove the scrivet at the rear of the recliner cover.
2. Remove the screw at the rear of the recliner cover.
3. Slide the recliner cover post out of the seat track hole and remove the recliner cover.
3. Remove the scrivet and separate the backrest cover lower J-clips.
4. Invert the backrest cover to the first row of hog rings.
5. Remove the 3 first row hog rings.
6. Invert the backrest cover up to the second row of hog rings.
7. Detach the pin-type retainer and remove the wires from the retainer.
