Flex FWD V6-3.5L (2010)
83. Disconnect the RH catalyst monitor electrical connector.
84. Disconnect the RH Variable Camshaft Timing (VCT) solenoid electrical connector.
85. Disconnect the 3 RH coil-on-plug electrical connectors.
86. Detach all of the wiring harness retainers from the RH valve cover and stud bolts.
87. Disconnect the LH VCT solenoid electrical connector.
88. Disconnect the 3 LH coil-on-plug electrical connectors.
89. Detach all of the wiring harness retainers from the LH valve cover and stud bolts.
90. NOTE: LH shown, RH similar.
Remove the 6 bolts and the 6 coil-on-plug assemblies.