Flex FWD V6-3.5L (2010)
![background image](/ford/flex_fwd/v6-3.5l/Page-646013.png)
44. NOTICE: If the engine is repaired or replaced because of upper engine failure, typically including valve or piston damage, check the
intake manifold for metal debris. If metal debris is found, install a new intake manifold. Failure to follow these instructions can result in
engine damage.
Using new gaskets, install the upper intake manifold and the 6 bolts.
-
Tighten in the sequence shown to 10 Nm (89 lb-in).
45. Install the fuel tube bracket bolt to the upper intake manifold.
-
Tighten to 6 Nm (53 lb-in).
46. Install the upper intake manifold support bracket bolt.
-
Tighten to 10 Nm (89 lb-in).
47. Attach the wiring harness retainers to the upper intake manifold.