Flex FWD V6-3.5L (2010)
Special Tool(s) Used With Diagnostics
Module Configuration
Inspection and Verification
Module Configuration
Inspection and Verification
This system provides step-by-step module configuration procedures. Carry out the procedure listed in the below chart for the module setting the DTC.
Refer to the Diagnostic Trouble Code (DTC) Chart in Body Control Systems for DTCs not listed below. See: Body and Frame/Body Control
Systems/Testing and Inspection/Diagnostic Trouble Code Descriptions/Diagnostic Trouble Code (DTC) Chart
Principles of Operation
Module Configuration
Principles of Operation
Configurable modules accommodate a variety of vehicle options, eliminating the need for many unique modules for one vehicle line. These modules
must be configured when replaced as part of a repair procedure. Configurable modules should not be exchanged between vehicles since the settings are
unique to each vehicle. Failure to configure a new module may result in incorrect operation and/or DTCs setting.