Flex FWD V6-3.5L (2010)
![background image](/ford/flex_fwd/v6-3.5l/Page-1186002.png)
8. NOTE: Some residual fuel may remain in the fuel tank filler pipe after draining the fuel tank. Carefully drain any residual fuel into a suitable
container.
Release the clamp and remove the fuel tank filler pipe hose from the fuel tank.
-
To install, tighten to 3 Nm (27 lb-in).
9. Disconnect the fuel vapor tube assembly-to-fuel tank filler pipe recirculation tube quick connect coupling. For additional information, refer to Fuel
Delivery and Air Induction.
10. Remove the fuel tank filler pipe bolt.
-
To install, tighten to 9 Nm (80 lb-in).
11. Release the fuel tank filler pipe from the fuel filler door cup bezel and remove the filler pipe from the vehicle.
12. To install, reverse the removal procedure.