Flex FWD V6-3.5L (2010)
3. Remove the nut and the manual control lever.
4. Disconnect the Transmission Range (TR) sensor electrical connector.
1. Slide the lock over.
2. Press the tab and disconnect the connector.
5. Disconnect the Turbine Shaft Speed (TSS) and Output Shaft Speed (OSS) sensor electrical connectors.
6. NOTE: Note the location of the different length bolts for assembly.
Remove the 11 bolts and the solenoid body.
7. NOTICE: Do not handle the solenoid body in the leadframe area or by the screens of the solenoid body filter or damage to the solenoid