Flex FWD V6-3.5L (2010)
Install the main control cover and loosely install the 14 bolts.
1. Bolt location
2. Studbolt location
3. Tighten the main control cover bolts in the sequence shown.
-
Tighten to 12 Nm (106 lb-in).
4. Position the transmission fluid cooler thermal bypass valve and transmission fluid cooler assembly in place and install the 2 nuts.
-
Tighten to 9 Nm (80 lb-in).
5. Connect the transaxle electrical connector and install the wiring harness fastener on the main control cover stud.
