Flex FWD V6-3.5L (2010)
6. Connect the TSS sensor electrical connector.
7. Wipe the surface of the existing solenoid body strategy tag on top of the transaxle case clean and install the new solenoid body strategy tag
(supplied with the solenoid body service kit) over it.
8. Install the main control cover.
-
For vehicles equipped with a 3.5L engine, refer to Main Control Cover - 3.5L See: Fluid Pan/Service and Repair.
-
For vehicles equipped with a 3.5L GTDI engine, refer to Main Control Cover - 3.5L GTDI See: Fluid Pan/Service and Repair.
9. Download a new solenoid body strategy to the PCM. For additional information, refer to Solenoid Body Strategy See: Transmission Control
Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Solenoid Body Strategy.
