Flex FWD V6-3.5L (2010)
![background image](/ford/flex_fwd/v6-3.5l/Page-2679005.png)
28. Lower the headliner.
29. Remove the 6 sunshade track-to-headliner retaining screws.
30. Remove the sunshade assemble from the headliner.
31. Remove the 2 sunshade stop-to-track retaining screws and the stops that are the located at the closest point to the sunshade on the tracks.
32. Remove the sunshade from the sunshade tracks.
Sunshade tracks
33. Remove the 2 remaining sunshade stop-to-track retaining screws and the stops that are located at the opposite end of the tracks.
34. Install the 2 sunshade stops and retaining screws onto the new tracks.
Sunshade
35. To install, reverse the removal procedure.
-
Make sure that the sunshade does not bind on the sunshade tracks, then tighten the sunshade track screws.