Flex FWD V6-3.5L (2010)
![background image](/ford/flex_fwd/v6-3.5l/Page-2680002.png)
4. Remove the lower B-pillar trim panel. For additional information, refer to B-Pillar Trim Panel See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/B-Pillar Trim Panel.
-
Pull outward on the trim panel to release the clips.
5. NOTE: Inspect the safety belt D-ring cover for damage. If the safety belt D-ring cover does not remain in place, install a new cover.
Remove the safety belt D-ring cover.
6. Remove the safety belt D-ring bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
7. Remove the upper B-pillar trim panel bolt and reposition the upper B-pillar trim panel aside.
8. Remove the upper C-pillar trim panel bolt cover.
9. Remove the upper C-pillar trim panel bolt.
10. Pull outward to release the C-pillar trim panel clips.
11. Reposition the C-pillar trim panel aside.
12. Remove the D-pillar trim panels. For additional information, refer to D-Pillar Trim Panel See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair/D-Pillar Trim Panel.