Focus L4-2.0L (2009)
-
Description: a description of the content of the software revision
-
History - Software
-
Date/Time: date and time of any recorded software installation
-
VIP: VIP software that was installed at that time
-
CIP: CIP software that was installed at that time
-
Description: a description of the content of the software revision
-
Available Software for Programming
-
Select: allows the software package to be selected
-
Lineage: the original software release, if the software available is a revision
-
VIP: VIP software level that is available with the selection
-
CIP: CIP software level that is available with the selection
-
Description: a description of the content of the software revision
9. Click a CIP software level to view the device compatibility list associated with the CIP software level, if desired.
10. To exit the APIM software level check, disconnect the scan tool from the DLC and the USB port, or exit the OASIS screen.
Audio Unit Part Number Retrieval
Audio Unit Part Number Retrieval
NOTE: The terms "audio unit" and "Audio Control Module (ACM)" refer to the same component.
1. Turn the audio system on.
2. Press and hold the Front Controls Interface Module (FCIM) memory preset buttons 3 and 6 for 3 seconds. The speaker walk-around test will
begin.
3. Before the speaker walk-around test is complete, press preset button 6.
4. Rotate the TUNE dial until the ACM part number is displayed.
5. Record the ACM part number.
6. Turn the audio system off.
Satellite Radio Receiver Electronic Serial Number (ESN) Retrieval
Satellite Radio Receiver Electronic Serial Number (ESN) Retrieval
NOTE: The terms "satellite radio receiver" and "Satellite Digital Audio Receiver System (SDARS)" module refer to the same component.
1. Operate the audio system in satellite radio mode.
2. Press and hold the AUX button and preset button 1, simultaneously.
-
The satellite radio receiver Electronic Serial Number (ESN) will be displayed on the Front Display Interface Module (FDIM) screen.
3. Record the satellite radio receiver ESN.
4. Turn the audio system off.