Focus L4-2.0L (2009)
Rear Bumper Cover / Fascia: Removal and Replacement
Bumper Cover - Rear
NOTE: Sedan shown, coupe similar.
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the tail lamp assemblies.
3. Disconnect the license plate light electrical connector.
4. Remove the 4 bumper cover upper pin-type retainers.
5. Remove the 2 upper bumper cover retainer screws.
6. NOTE: Sedan shown, coupe similar.
Remove the 2 fender splash shield-to-bumper cover pin-type retainers (1 each side).