Focus L4-2.0L (2009)
Seat Cover: Service and Repair
Rear Seats
Seat Backrest Cover - Rear
Removal and Installation
1. Push the buttons on the head restraint guides and remove the head restraint(s).
2. NOTE: If the locking tab on the head restraint guide is damaged during removal, a new head restraint guide must be installed.
Remove the head restraint guides.
-
Insert an appropriate flat-blade screwdriver along side the head restraint guide below the backrest cover and release button.
-
Release the locking tab and pry upward to remove.
3. Release the lower J-clip and hook-and-loop strip.
4. NOTICE: Use care when separating the backrest trim cover from the hook-and-loop strips, or the hook-and-loop strips can be torn from
the backrest foam pad.
Invert the backrest cover and remove the row of hog rings.
5. Invert and remove the backrest cover.
-
Route the latch release strap through the backrest cover opening.
6. To install, reverse the removal procedure.
