Focus L4-2.0L (2009)
9. Remove the 3 Hydraulic Control Unit (HCU) bracket-to-frame nuts.
-
To install, tighten to 9 Nm (80 lb-in).
10. Remove the 2 HCU-to-bracket bolts and separate the HCU from the support bracket.
-
To install, tighten to 9 Nm (80 lb-in).
11. To install, reverse the removal procedure.
-
Bleed the brake system.
-
For vehicles equipped with Electronic Stability Control (ESC), carry out the IVD Initialization sequence. Follow the scan tool directions.