Focus L4-2.0L (2009)
Both cables
17. Disconnect the parking brake cable at the cable union.
Intermediate cable
18. Remove the 2 parking brake cable guide bolts and disconnect the parking brake cable guide from the lower control arms.
-
To install, tighten to 3 Nm (27 lb-in).
19. Pull the parking brake cable through the lower control arm.
Both cables
20. Remove the parking brake cable.
21. NOTE: The LH intermediate cable can be identified by a green sleeve.
To install, reverse the removal procedure.
-
Adjust the parking brake. For additional information, refer to Parking Brake Cable Adjustment See: Adjustments.