Focus L4-2.0L (2009)
Drive Belt Tensioner: Service and Repair
Accessory Drive Belt Tensioner
Accessory Drive Belt Tensioner
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the 2 bolts and accessory drive belt splash shield.
-
To install, tighten to 9 Nm (80 lb-in).
3. Using the hex feature, rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt from the tensioner.
4. NOTE: The accessory drive belt tensioner must be replaced as a complete unit.
Remove the 2 bolts and the accessory drive belt tensioner.
-
To install, tighten to 25 Nm (18 lb-ft).
5. To install, reverse the removal procedure.