Focus L4-2.0L (2009)
Oil Pick Up/Strainer: Service and Repair
Oil Pump Screen and Pickup Tube
Oil Pump Screen and Pickup Tube
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the oil pan. For additional information, refer to Oil Pan See: Oil Pan/Service and Repair/Oil Pan.
3. Remove the 2 bolts and the oil pump screen and pickup tube.
-
Discard the gasket.
Installation
1. Clean and inspect all mating surfaces.
2. Using a new gasket, install the oil pump screen and pickup tube and the 2 bolts.
-
Tighten to 10 Nm (89 lb-in).
3. Install the oil pan. For additional information, refer to Oil Pan See: Oil Pan/Service and Repair/Oil Pan.