Focus L4-2.0L (2009)
11. Connect the fuel vapor return hose.
12. Connect the electronic throttle control electrical connector.
13. Connect the EOP switch electrical connector and attach the wire harness retainer to the starter stud bolt.
14. Install the oil level indicator and tube. For additional information, refer to Oil Level Indicator and Tube See: Engine Lubrication/Engine Oil Dip
Stick - Dip Stick Tube/Service and Repair/Oil Level Indicator and Tube.
15. Install the lower intake manifold bolt.
-
Tighten to 18 Nm (159 lb-in).
16. Install the transaxle fluid indicator.
17. Install the front impact severity sensor. For additional information, refer to Air Bag Systems.
18. Install the ACL outlet pipe.