Focus L4-2.0L (2009)
J3 CHECK THE PCM
-
Disconnect: PCM C175b.
-
Do the stoplamps continue to illuminate?
Yes
If equipped with stability control, GO to J4.
If not equipped with stability control, GO to J5.
No
GO to J7.
-------------------------------------------------
J4 CHECK THE ABS MODULE
-
Disconnect: ABS Module C155.
-
Do the stoplamps continue to illuminate?
Yes
GO to J5.
No
GO to J8.
-------------------------------------------------
J5 CHECK CIRCUIT CCB08 (VT/WH) FOR A SHORT TO VOLTAGE
-
Disconnect: SJB C2280b.
-
Does the high mounted stoplamp continue to illuminate?
Yes
REPAIR the circuit. CLEAR the DTCs. REPEAT the self-test.
No
GO to J9.
-------------------------------------------------
J6 CHECK THE STOPLAMPS VOLTAGE SUPPLY CIRCUIT FOR A SHORT TO VOLTAGE
-
Disconnect: SJB C2280d.
-
Do the stoplamps continue to illuminate?
Yes
If the LH rear lamp continues to illuminate, REPAIR circuit CLS18 (GY/BN) for a short to voltage. CLEAR the DTCs. REPEAT the self-test.
If the RH rear lamp continues to illuminate, REPAIR circuit CLS19 (VT/OG) for a short to voltage. CLEAR the DTCs. REPEAT the self-test.
No
GO to J9.
-------------------------------------------------
J7 CHECK FOR CORRECT PCM OPERATION
-
Disconnect all the PCM connectors.
-
Check for:
-
corrosion
-
damaged pins