Focus L4-2.0L (2009)
![background image](/ford/focus/l4-2.0l/Page-436001.png)
Fluid - M/T: Service and Repair
MTX75
Transaxle Draining and Filling
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the drain plug and drain the transaxle.
3. Clean and install the drain plug.
-
Tighten to 35 Nm (26 lb-ft).
4. NOTE: Before removing, clean the area around the filler plug.
Remove the fill plug.
5. Using a suitable oil suction gun, fill the transaxle to the correct level with the specified fluid.
-
Transaxle fluid level: 0.0-5.0 mm (0.0-0.2 in) below the lower edge of the filler plug bore.
6. Install the fill plug.
-
Tighten to 35 Nm (26 lb-ft).