ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2550 > < Initial Inspection and Diagnostic Overview|Page 2548
Page 37
background image

Yes

GO to M12.

No

CONNECT the negative battery cable. GO to M25.

-------------------------------------------------
M12 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER
WITH THE HVAC MODULE DISCONNECTED

-

Disconnect: HVAC Module C2357a.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to M13.

No

CONNECT the negative battery cable. GO to M26.

-------------------------------------------------
M13 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER
WITH THE FDIM DISCONNECTED

-

Disconnect: FDIM C2123.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to M14.

No

CONNECT the negative battery cable. GO to M27.

-------------------------------------------------
M14 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER
WITH THE FCIM DISCONNECTED

-

Disconnect: FCIM C2402.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

Initial Inspection and Diagnostic Overview|Page 2550 > < Initial Inspection and Diagnostic Overview|Page 2548