ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2566 > < Initial Inspection and Diagnostic Overview|Page 2564
Page 53
background image

Yes

GO to O12.

No

CONNECT the negative battery cable. GO to O23.

-------------------------------------------------
O12 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER
WITH THE ABS MODULE DISCONNECTED

-

Disconnect: ABS Module C135 or C155.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to O13.

No

CONNECT the negative battery cable. GO to O24.

-------------------------------------------------
O13 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER
WITH THE RCM DISCONNECTED

-

Disconnect: RCM C310b.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to O14.

No

CONNECT the negative battery cable. GO to O25.

-------------------------------------------------
O14 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER
WITH THE OCSM DISCONNECTED

-

Disconnect: OCSM C3285.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

Initial Inspection and Diagnostic Overview|Page 2566 > < Initial Inspection and Diagnostic Overview|Page 2564