Focus L4-2.0L (2009)
Oil Separator: Service and Repair
Crankcase Vent Oil Separator
Removal and Installation
1. Remove the intake manifold.
2. Release the bypass hose from the retainer clip and position aside.
3. Remove the 8 bolts, crankcase vent oil separator and the gasket.
-
To install, tighten to 10 Nm (89 lb-in).
4. NOTE: Clean and inspect the gasket mating surfaces.
To install, reverse the removal procedure.
-
Inspect and replace the crankcase vent oil separator gasket as necessary.