Focus L4-2.0L (2009)
Resonator: Service and Repair
Intake Air Resonator
Removal and Installation
1. Loosen the clamp and separate the Air Cleaner (ACL) outlet pipe from the intake air resonator.
-
To install, tighten to 4 Nm (35 lb-in).
2. Remove the 2 bolts and detach the intake air resonator from the grommets.
-
Remove the intake air resonator.
-
To install, tighten to 7 Nm (62 lb-in).
3. To install, reverse the removal procedure.