Focus L4-2.0L (2009)
2. Using the Crankshaft Sensor Aligner, adjust the CKP sensor. Tighten the 2 CKP sensor bolts to 7 Nm (62 lb-in).
3. Connect the CKP sensor electrical connector.
4. Remove the 6 mm x 18 mm bolt.
5. Remove the Crankshaft TDC Timing Peg.
6. Install the cylinder block plug.
-
Tighten to 20 Nm (177 lb-in).
7. Install the accessory drive belt splash shield and the 2 bolts.
-
Tighten to 9 Nm (80 lb-in).