Focus L4-2.0L (2009)
Seat Position Sensor: Service and Repair
Seat Position Sensor
1. Position the driver seat to the rearmost and maximum height position.
2. Depower the Supplemental Restraint System (SRS). For additional information, refer to Supplemental Restraint System (SRS) Depowering and
Repowering See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and
Repair/Supplemental Restraint System (SRS) Depowering and Repowering in the General Procedures portion.
3. Disconnect the seat position sensor electrical connector.
4. Remove the lock tab from the seat position sensor.
5. Remove the seat position sensor from the bracket.
6. To install, reverse the removal procedure.
7. Repower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair/Supplemental Restraint
System (SRS) Depowering and Repowering in the General Procedures portion.
