Focus L4-2.0L (2009)
Support the flexible exhaust pipe, using a suitable wrap.
10. Disconnect the front exhaust pipe and detach the support isolators.
-
Discard the gasket.
11. Disconnect the center exhaust hanger and support the exhaust with wire.
12. Remove the 8 fasteners and the exhaust heat shield.
13. Disconnect the selector lever cable from the retainer on the unibody and the selector lever cable retaining bracket on the transaxle.
14. Disconnect the selector lever cable from the selector lever cable bracket and manual control lever.
1. Disconnect the selector lever cable end from the manual control lever.