Focus L4-2.0L (2009)
20. Position the carpet out from under the heater core and evaporator core housing to gain access to the selector lever cable grommet.
21. NOTE: Heater core and evaporator core housing removed for clarity.
Remove the 2 selector lever cable grommet nuts.
22. Remove the selector lever cable.
-
Pull the selector lever cable through the floor panel and remove it through the passenger compartment.
Installation
All vehicles
1. NOTE: Heater core and evaporator core housing removed for clarity.
Position the selector lever cable in place, install the grommet on the floor panel and install the 2 nuts.
-
Tighten to 9 Nm (80 lb-in).
2. Position the carpet back in place under the heater core and evaporator core housing.
3. Install the LH floor vent and the 2 screws.
