Focus L4-2.0L (2009)
PZEV
19. Tighten the ACL inlet hose clamp.
-
Tighten to 4 Nm (35 lb-in).
Non-PZEV
20. Install the 2 ACL bolts.
-
Tighten to 9 Nm (80 lb-in).
All vehicles
21. NOTE: PZEV shown, non-PZEV similar.
Connect the MAF sensor electrical connector.
22. Position the battery tray in place and install the 4 wiring harness retainers on the battery tray.
23. Position the battery tray on the studs and install the 3 battery tray nuts.
-
Tighten to 12 Nm (106 lb-in).