Focus L4-2.0L (2009)
Installation
All vehicles
1. If the transmission fluid cooler tube latches are not in the unlocked position, compress the tabs on the transmission fluid cooler tube latches and
slide the latch out of the transmission fluid cooler tube to unlock the latch.
2. Install the transmission fluid cooler tubes. Connect the transmission fluid cooler tubes to the transaxle and the transmission fluid cooler and slide
the latches to the locked position.
-
Pull back on each connector to confirm that it is locked on the transaxle or the transmission fluid cooler.
3. Install the 4 secondary latches.
4. Position the ACL in place and tighten the ACL outlet tube clamp.
-
Tighten to 4 Nm (35 lb-in).