Focus L4-2.0L (2009)
Removal
2-door vehicles
1. Remove the B-pillar trim panel.
4-door vehicles
2. Remove the quarter trim panel.
All vehicles
3. Before cutting the urethane adhesive, remove dirt and other foreign material from the windshield pinch weld area.
-
Use a clean shop towel or oil-free compressed air.
4. NOTE: Refer to manufacturer's instructions before using the Deluxe Windshield Removal Tool.
Lubricate the urethane adhesive with water to aid the Deluxe Windshield Removal Tool when cutting the urethane adhesive.
5. WARNING: Always wear eye protection when servicing a vehicle. Failure to follow this instruction may result in serious personal injury.
WARNING: Wear protective gloves when handling components or parts that have pointed or sharp edges. Failure to follow this
instruction may result in serious personal injury.
NOTICE: Make sure the cutting blades are changed where the cutting depth changes to avoid damage to the body and trim panels.
NOTICE: To avoid rust formation, use extreme care not to scratch the paint or primer, or otherwise damage the pinch weld during glass
removal.
NOTE: Insert the blade into the Deluxe Windshield Removal Tool so that the flat side is against the glass.
NOTE: Some resistance may be encountered when cutting through the glass locating pegs in the upper right and lower left corners of the glass.
Using the Deluxe Windshield Removal Tool, start cutting at the top and work towards the corners and remove the rear quarter window glass.
Installation