Focus L4-2.0L DOHC VIN 3 (2002)
9. Install the EGR valve with a new gasket and EGR pipe bracket.
10. Install the accelerator cable and the speed control cable (if equipped) to the throttle body.
11. Install the air cleaner housing.
^
Insert the air filter housing into the rubber bushings.
1. Attach the mass air flow (MAF) sensor connector.
2. Attach the crankcase ventilation hose.
3. Attach the intake hose.
12. If necessary, install new cable ties when reinstalling.
13. NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its
adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
Connect the battery ground cable.