Focus L4-2.0L DOHC VIN 3 (2002)
Wheel Bearing: Procedures
Wheel Bearing
Removal
1.
Remove the wheel knuckle.
2.
NOTE: When removing the hub from the wheel knuckle the bearing will be destroyed. The bearing inner ring will be on the hub and the bearing
outer ring will be in the wheel knuckle.
Using the special tools, remove the wheel hub from the wheel knuckle.
3.
CAUTION: The special tools must be used to prevent damage to the hub. If the hub is damaged a new hub must be installed.
CAUTION: Do not use heat to remove the bearing inner ring.
Using the special tools, remove the bearing inner ring from the wheel hub.