Focus L4-2.0L DOHC VIN 3 (2002)
6. Remove the evaporative emission canister from the bracket.
INSTALLATION
WARNING: DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR
ANY FUEL RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND CAN IGNITE. FAILURE
TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
1. To install, reverse the removal procedure.
2. Carry out the Leak Test. See: Testing and Inspection/Component Tests and General Diagnostics/Evaporative Emission System Leak Test
3. Carry out the Evaporative Emission Repair Verification Drive Cycle. See: Testing and Inspection/Component Tests and General
Diagnostics/Evaporative Emission Repair Verification Drive Cycle