Focus L4-2.0L DOHC VIN 3 (2002)
9. Remove the fuel filler pipe.
1. Remove the two bolts.
2. Remove the fuel filler pipe.
INSTALLATION
WARNING: DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR
ANY FUEL RELATED COMPONENTS. HIGHLY FLAMMABLE VAPORS ARE ALWAYS PRESENT AND MAY IGNITE. FAILURE TO
FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
NOTE: The fuel filler and vent pipe retaining clamp and clips must be installed in the same position as removed.
1. To install, reverse the removal procedure.
2. Carry out an evaporative emission system leak test. See: Emission Control Systems/Evaporative Emissions System/Testing and
Inspection/Component Tests and General Diagnostics/Evaporative Emission System Leak Test