Focus L4-2.0L DOHC VIN 5 (2003)
8. Cut urethane adhesive applicator tip to specification.
9. Apply a bead of urethane adhesive on top of the existing urethane bead on the pinch weld. Make sure that all gaps in the urethane adhesive are
smoothed into one continuous bead.
10. Install the rear window glass on the pinch weld.
11. Inspect the rear window glass for air or water leaks through the urethane adhesive seal.
12. Connect the heated rear window glass electrical connectors.
3-Door, 5-Door
13. Install the liftgate side trim panels on both sides.